- Liittynyt
- 4.5.2005
- Viestejä
- 888
- Ikä
- 41
Nyt kaivattais vähän apua jos joku ketjua lukee eli
Onko kukaan asennellut kyseiseen läppäriin FIN Win XP Pro:ta? Ongelmana on ettei tykkää XP:stä ja Sata-ajurit pitäisi laittaa läppäriin. Onnistuuko homma kyseisen guiden mukaan jos pistän NLitellä sata-ajurit cd:lle ja teen uuden XP:n levy jolta asennetaan ja seuraan ohjeita:
Rear people, I a ACER Travemlate 5720G added themselves. Unfortunately the laptop had a small birth error (Vista) therefore has I tries Windows XP Professional to install and had some problems.
So that you these problems do not have, here: Guidance for the installation of Windows XP on a Acer Travelmate 5720G Procure for you BEFORE FORMATTING all drivers and programs on the ACER homepage to find are. (we do not need all, but better all have than that more importantly are missing afterwards).
Lay for you out a disk and in the case of doubt an external USB disk drive assembly. Driver Downloads: http://support.acer euro.com/drivers... k/tm_5720.html BEFORE FORMATTING: F6 Intel SATA HDD Driver floppy Utility.zip With this program one knows the SATA driver necessary for the installation on a disk zeihen to leave. Open the program for for the 32 bits driver [ f6flpy32.exe ]. (the processor is 64 Biter, but all drivers supplied by ACER are 32bit!) The program copies then on a disk all necessary drivers. Provide with nLite a Windows XP installation to CD in that the driver: "is integrated by the disk iaahci.inf". (text version, has functioned) or use an external USB disk drive assembly. For all me trust I all contents of the disk here in the forum as zip high-loaded. Like one a XP CD with drivers makes stands e.g. here:
http://board.gulli.com/thread/328323... dows xp setup/ FORMAT [ 0. ] 1st PUT the WinXP SP2 CD attaches USB disk drive assembly with disk to the laptop disc tons of DVD ROM. 2 -- 3rd power on system and press "F2" key ton of enter BIOS. 5. System start installation. 4. Set boat priority 1:CD/DVD 2:IDE0 3:USB FDD then restart. 6. Please press "F6 key" for several times while you lake the "press F6 if you......." is displayed below the screen. 7. After about 3~4 minute, the system appear "Windows Setup"screen. 8. Press "S key", SELECT "Intel 82801HEM/HBM SATA AHCI Controller(Mobile ICH8M-E/M then)". 9. The system wants load AHCI more driver through the USB floppy disc, then presses "Enter key". 10. The system CAN identify the SATA HDD and start installation successfully, check the system without appear bluescreen.
DRIVER INSTALLING, in this order: Chipset_Intel965_v8.2.0.1012_Vista_XP.zip VGA_ATi_v8.371_XP.zip AHCI_Intel_v7.5.0.1017_Vista_XP.zip LAN_Broadcom_v10.26.0.0_XP.zip Audio_Realtek_v5.10.0.5423_XP.zip (it evt. to the raising an error message will be indicated, the "AzMixerSel.exe" not be loaded could) [ error message first times to ignore ] Connect your computer now briefly with the InterNet and open the equipment manager. Let you from Windows a driver search for: Equipment manager: System/PCI BUS. Subsequently, you should also correspond all other search desires from Windows to drivers. From now on the installation sequence should be all the same: TouchPad_Synaptics_v8.2.9.0_XP.zip CardR_TI_v2.0.0.7_XP.zip Wireless_Intel_3945_4965_v11.1.1.11_XP.zip BlueTooth_Broadcom_v5.1.0.3300_XP.zip Modem_Foxconn_Conexant_v7.62.0.0_XP.zip Webcam_Bison_Driver_v7.96.701.07_XP.zip (does not have!) NOT INSTALLING: Webcam_Suyin_Driver_v5.7.28.500-1.0 _ Vista_XP.zip Webcam_Suyin_AP_v1.0.8_Vista_XP.zip (is the program, with which one can serve the Camera)
the driver provides for which cannot be driven down to Windows any longer. Windows remains putting screen when driving down on the normal "Windows driven down". Evt. are better suitable newer versions of this driver. In addition, the "Webcam_Bison_Driver_v7.96.701.07_XP.zip" seems to function not has no malfunctionings and does perhaps nevertheless more its obligation than thought. WINDOWS UPDATE INSTALLING if Windows is installed, should all updates by Windows be brought in e.g. with the C'T update CD
Neuvottiin Murossa näin:
"Toinen tapa tehdä asennuscd:
http://forum.driverpacks.net/viewtopic.php?id=1449
Integroi levylle tuo driverpack mass storage. Sen pitäisi sisältää tarvittavat ajurit."
Tulee tylysti "Asennus ei havainnut levykeasemaa tietokoneessa OEM-ohjainten lataamiseksi. *Peruuta OEM-ohjainten lataaminen painamalla ESC, *Lopeta asennus painamalla F3". Integroin ohjeiden mukaan tuon mass storagen levylle Driverpackilla ja yritin käynnistää XP:n uudelta rw-levyltä jolla nuo ajurit on. Mitään virheitä ei tullu joten homma meni ihan oikein. Tein bootattavan ison Nlitellä jonka Nerolla kärräsin rw-levylle.
Ei tota lisälaitetta jostain ihmeen syystä löydy ja vaikka kuinka M = määritä lisälaite niin ei se lähde noita ajureita levyltä syöttämään. Voiko nuo oikeat ajurit jotenki purkaa ja ajaisi vaan vaikka pelkältä rw-levyltä tossa määritä lisälaite kohdassa? Tarviiko tuo muka jonkun korppuaseman tohon sata-ajurien asennukseen vai eikö driverpackissä olevat kelvanneet?
Eli millä helvetillä saan ton koneen hyväksymään noi sata-ajurit Windowsin asennukseen että saan asennuksen loppuun? Mitään usb-korppuasemaa ei tähän löydy.
Onko kukaan asennellut kyseiseen läppäriin FIN Win XP Pro:ta? Ongelmana on ettei tykkää XP:stä ja Sata-ajurit pitäisi laittaa läppäriin. Onnistuuko homma kyseisen guiden mukaan jos pistän NLitellä sata-ajurit cd:lle ja teen uuden XP:n levy jolta asennetaan ja seuraan ohjeita:
Rear people, I a ACER Travemlate 5720G added themselves. Unfortunately the laptop had a small birth error (Vista) therefore has I tries Windows XP Professional to install and had some problems.
So that you these problems do not have, here: Guidance for the installation of Windows XP on a Acer Travelmate 5720G Procure for you BEFORE FORMATTING all drivers and programs on the ACER homepage to find are. (we do not need all, but better all have than that more importantly are missing afterwards).
Lay for you out a disk and in the case of doubt an external USB disk drive assembly. Driver Downloads: http://support.acer euro.com/drivers... k/tm_5720.html BEFORE FORMATTING: F6 Intel SATA HDD Driver floppy Utility.zip With this program one knows the SATA driver necessary for the installation on a disk zeihen to leave. Open the program for for the 32 bits driver [ f6flpy32.exe ]. (the processor is 64 Biter, but all drivers supplied by ACER are 32bit!) The program copies then on a disk all necessary drivers. Provide with nLite a Windows XP installation to CD in that the driver: "is integrated by the disk iaahci.inf". (text version, has functioned) or use an external USB disk drive assembly. For all me trust I all contents of the disk here in the forum as zip high-loaded. Like one a XP CD with drivers makes stands e.g. here:
http://board.gulli.com/thread/328323... dows xp setup/ FORMAT [ 0. ] 1st PUT the WinXP SP2 CD attaches USB disk drive assembly with disk to the laptop disc tons of DVD ROM. 2 -- 3rd power on system and press "F2" key ton of enter BIOS. 5. System start installation. 4. Set boat priority 1:CD/DVD 2:IDE0 3:USB FDD then restart. 6. Please press "F6 key" for several times while you lake the "press F6 if you......." is displayed below the screen. 7. After about 3~4 minute, the system appear "Windows Setup"screen. 8. Press "S key", SELECT "Intel 82801HEM/HBM SATA AHCI Controller(Mobile ICH8M-E/M then)". 9. The system wants load AHCI more driver through the USB floppy disc, then presses "Enter key". 10. The system CAN identify the SATA HDD and start installation successfully, check the system without appear bluescreen.
DRIVER INSTALLING, in this order: Chipset_Intel965_v8.2.0.1012_Vista_XP.zip VGA_ATi_v8.371_XP.zip AHCI_Intel_v7.5.0.1017_Vista_XP.zip LAN_Broadcom_v10.26.0.0_XP.zip Audio_Realtek_v5.10.0.5423_XP.zip (it evt. to the raising an error message will be indicated, the "AzMixerSel.exe" not be loaded could) [ error message first times to ignore ] Connect your computer now briefly with the InterNet and open the equipment manager. Let you from Windows a driver search for: Equipment manager: System/PCI BUS. Subsequently, you should also correspond all other search desires from Windows to drivers. From now on the installation sequence should be all the same: TouchPad_Synaptics_v8.2.9.0_XP.zip CardR_TI_v2.0.0.7_XP.zip Wireless_Intel_3945_4965_v11.1.1.11_XP.zip BlueTooth_Broadcom_v5.1.0.3300_XP.zip Modem_Foxconn_Conexant_v7.62.0.0_XP.zip Webcam_Bison_Driver_v7.96.701.07_XP.zip (does not have!) NOT INSTALLING: Webcam_Suyin_Driver_v5.7.28.500-1.0 _ Vista_XP.zip Webcam_Suyin_AP_v1.0.8_Vista_XP.zip (is the program, with which one can serve the Camera)
the driver provides for which cannot be driven down to Windows any longer. Windows remains putting screen when driving down on the normal "Windows driven down". Evt. are better suitable newer versions of this driver. In addition, the "Webcam_Bison_Driver_v7.96.701.07_XP.zip" seems to function not has no malfunctionings and does perhaps nevertheless more its obligation than thought. WINDOWS UPDATE INSTALLING if Windows is installed, should all updates by Windows be brought in e.g. with the C'T update CD
Neuvottiin Murossa näin:
"Toinen tapa tehdä asennuscd:
http://forum.driverpacks.net/viewtopic.php?id=1449
Integroi levylle tuo driverpack mass storage. Sen pitäisi sisältää tarvittavat ajurit."
Tulee tylysti "Asennus ei havainnut levykeasemaa tietokoneessa OEM-ohjainten lataamiseksi. *Peruuta OEM-ohjainten lataaminen painamalla ESC, *Lopeta asennus painamalla F3". Integroin ohjeiden mukaan tuon mass storagen levylle Driverpackilla ja yritin käynnistää XP:n uudelta rw-levyltä jolla nuo ajurit on. Mitään virheitä ei tullu joten homma meni ihan oikein. Tein bootattavan ison Nlitellä jonka Nerolla kärräsin rw-levylle.
Ei tota lisälaitetta jostain ihmeen syystä löydy ja vaikka kuinka M = määritä lisälaite niin ei se lähde noita ajureita levyltä syöttämään. Voiko nuo oikeat ajurit jotenki purkaa ja ajaisi vaan vaikka pelkältä rw-levyltä tossa määritä lisälaite kohdassa? Tarviiko tuo muka jonkun korppuaseman tohon sata-ajurien asennukseen vai eikö driverpackissä olevat kelvanneet?
Eli millä helvetillä saan ton koneen hyväksymään noi sata-ajurit Windowsin asennukseen että saan asennuksen loppuun? Mitään usb-korppuasemaa ei tähän löydy.
